 |
Spool Gun Spoolmate 185 / 3035 Style  A Spoolgun is the perfect addition to
any Mig welding system. These compact guns
with 20' cable lengths enable the operator
to weld steel and aluminum far from the power
supply with .023"-.047" diamater wire.
SpoolGuns are suitable for most MIG power supplies with min. output of 130-Amps. Switch Kits (#707.2518-Euro or #707.1850-ather) are available for most welders

|  | Spool Gun Spoolmate 250 / 3545 Style 250 Amp compact Spool Gun with 4" wire-reel allows for smooth feeding of aluminum or mild-steel wire. Spool Gun comes complete with 20' power cable assembly and direct-connect machine plug.
Smooth, variable speed wire feeding is insured by 24VDC direct-drive PM motor mounted in the handle of the gun.

|
 |
 |
Spool Gun Switch Kit Miller / Hobart Style Switch kit for Miller 185, 190 & 210 / Hobart 210 & 250 systems that are prewired for Spool Gun module. Simply install MIG / SpoolGun switch on operator's panel and direct-plug on to machine control PC board. Check your owners manual for requirements.

|  | Spool Gun Switch Kit- Universal This simple switch kit allows you to install a spoolgun on virtually ANY MIG welding machine. Just install the toggle switch on the machine panel and connect to the wire-feed motor power leads.
Once installed, the switch directs power to the spoolgun and the speed may be adjusted by the machine speed control.
Simple instructions included

|
 |
 |
Spoolmate Neck 196827 / 199385 Standard 5"-180° gun tube assembly 196827 & 199385 fit Nu-Tec® 185/250 & Miller® SpoolMate 185/3035 & 250/3545 spool guns.
These complete swan neck assemblies include head tube, liner guide, diffuser, contact tip, nozzle, outer barrel and locking nut.
Select model from list below:

|  | Drive Roll Kit Spoolmate Style 199731 & 186413 Drive roll kits include 2 rolls. 1 Drive roll & 1 pressure roll. Kit are designed for use with Miller® & Hobart® 185(3035) & 250(3545) and Nu-TecSys® 185 systems.
Packaged in set of one

|
 |
 |
Contact Tips Miller Spoolmate (5-Pack) Spool gun contact tips 199730 / 186419 / 186406 / 199387 / 199388 / 199389 for Miller® Spoolmate® 185/3035 & 250/3545 style spool gun. Select required size from the drop down list below.
NOTE: Check the thread size of the tips for your gun before ordering.
Standard 5 pc. pack.

|  | Contact Tip Miller Spoolmatic (10-Pack) Contact tips 135424 / 135425 / 135428 / 135430 for Miller® and Hobart® style spool guns. Tips are direct replacement for XR Edge, XRM15/30A, 15/30W and Spoolmatic 30A/W with straight (180 deg.) neck assembly.
NOTE; These tips are not compatible with the FASTIP option available from Miller®. See: FASTIP listings for these tips.
Standard packaging 10 pcs. per pack.

|
 |
 |
Contact Tip Miller FasTip (10-Pack) These OEM Miller FasTip 206186 / 206187 / 206188 / 206189 / 206190 / 206177 / 206178 / 206179 / 206180 / 206181 contact tips are identifiable by the tapered seat and thread which connects the tip to the gas diffuser.
Standard package 10 pcs. per pack.

|  | Nozzle Miller® Spoolmatic Style  Select the standard 5/8" id. x 1 5/8" long nozzle or the 1/2" id. x 1 5/8" long nozzle for this spool gun.
Standard packaging 2 pcs. per pack.

|
 |
 |
Nozzle 185 Spoolmate 186405 ( 2 Pack) Replacement Spoolmate® style nozzle 186405 for Miller® & Nu-Tec® 185 Amp spool guns.
2 pieces per package

|  | Nozzle 250 Spoolmate 199386 (2 Pack) Spoolmate® style copper nozzle 199386 (5/8" id) fits Miller®, Hobart® & Nu-Tec® 250 Amp spool guns.
Standard packaging 2 pcs. per pack

|
 |
 |
Contact Tip Lincoln Aluminum (S18697-46) 25 Pc. Pack Premium quality Aluminum "Tab" 3/64" contact tip Lincoln® KP2010-6 / S18697-46 style for welding aluminum with Magnum SG Spool Gun.
25 pieces per package

|  | Gas Diffusor Lincoln SG Spool Gun (2-Pack) Premium quality gas diffusor KP2010-6 / S18697-47 for Lincoln® Magnum SG Spool Gun.
Two pieces per package

|
 |
 |
Head Tube Liner 136682 Miller XR Teflon head tube liner 136682 for Miller® XR pistol grip spool gun.

|  | Spoolmate Gearbox 186412  Replacement gear drive assembly 186412, with drive rolls, for Nu-Tec®, Miller® & Hobart® 185, 250, 2050 & 3035 style spoolguns.
Gear drive assembly only. Motor sold separately.

|
 |
 |
Miller ® SGA100 Spool Gun Control This control comes with everything you need to add a spoolgun to your welding machine. Unit connects between spoolgun and welding machine to supply variable 24VDC power to the spoolgun motor, open gas valve and close machine trigger circuit.
Includes a 10' power cord with plug, 6' machine-to-control box cable and 5' gas hose.
Works on any machine with 24VDC trigger contactor. CV-engine drive welders require the SGA100C with contactor.

|  | Miller® SGA100C Control with Contactor This control comes with everything you need to add a spoolgun to your welding machine. Unit connects between spoolgun and welding machine to supply variable 24VDC power to the spoolgun motor, open gas valve and close contactor for trigger circuit.

|
 |